Expert Answers about Sea-Doo Trailer Fenders
- Fender Backing Plate Compatibility with etrailer 15 Inch Wheel Fender HP29VR
- The Backing Plate for Single Axle Trailer Fender - 30" Long x 12" Tall # HP42FR will not a direct fit for the fender # HP29VR. The backing plate is designed to directly fit the fender # HP36VR, however with very slight adjustments, it can work well. This is the best option we carry to closely fit that fender.
With any of these trailer fender options, you will still want to use fender brackets like the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty...
view full answer... - Fenders For A Venture VR-2450 Boat Trailer
- The research I have done on the Venture boat trailer fenders shows the fender not having side steps like the Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 14" Wheels - Qty 1 Item # F008594. If you are wanting to upgrade to a fender with side steps you may have to add brackets for the steps. If you are just wanting replace the factory fenders, I recommend the Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14" Wheels - Qty 1 Item # F008554...
view full answer... - Will CE Smith Single Axle Trailer Fender # CE17100ATB Be a Good Fit for Tear Trailer
- With the measurements that you have provided for your current fenders, it sounds like the CE Smith Single Axle Trailer Fender, # CE17100ATB, would be a great replacement option. To mount these fenders you could use Mounting Brackets for Trailer Fender, # CE26098G-2. These brackets are sold in pairs and one pair is required for each fender.
I have also included a link to the other fenders that we offer which are similar in size to your current fenders.
view full answer... - Can The Fulton Single Axle Trailer Fenders Be Mounted By The Inner Fender?
- I recommend using the Fulton Single Axle Trailer Fender # F008542 if you are wanting to mount the fender on the inner wheel flange.
The Fulton Single Axle Trailer Fender # F008540 uses Mounting Brackets # CE26065PGA to hold the fender in place. It uses these brackets to stabilize the fender as the limited stucture will not provide enough stability for the fender if mounted by the inner fender well.
view full answer... - Availability of Replacement Fenders for a Shorelandr Trailer
- The Fulton Single Axle Trailer Fenders with Top and Side Steps - Black Plastic, # F008584-2, are a pair of fenders that are designed for a single axle trailer with 14 inch wheel.
The overall dimensions of the fenders is 9-5/8 inches wide x 42-5/8 inches long x 12-3/4 inches tall. The top step measures 8 inches wide.
We do not have any reference for replacement parts for the Shoreland'r trailer. If the measurements of these fenders matches your current fenders, then these Fulton fenders...
view full answer... - Replacement Fender for Shorelander Trailer with Single Axle, 13 Inch Wheels
- For a fender like you described, you will want to use the Fulton Single Axle Trailer Fender with Top Step # F008553. This fender is designed to work with 13 inch wheels like those on your trailer. The # F008553 fender is made of black plastic and will provide you with a step on top of the fender.
This fender is designed to be mounted with brackets like # PF775-BKT-2.
I have attached a chart showing the measurements for this fender, as well as a review video of the fender. We do not offer...
view full answer... - Will Fulton Plastic Fenders Fit on a 2000 EZ Loader Single Axle Trailer with 13 Inch Wheels
- The Fulton Plastic Fender, # F008573, is designed to work on trailers with 13 inch wheel and tire combinations like your EZ Loader trailer.
The fender will require a mounting bracket. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use L brackets, # PF775-BKT-2, to mount the fender to your trailer frame. Some modification of the fender or trailer mounting brackets may be required.
view full answer... - Will Fulton Trailer Fender # F008550 Fit a 2006 Snowbear 8000 Trailer
- I did a little research and found that the model 8000 Snowbear trailer had a fender that is a little different than the Fulton Plastic Fender, # F008550. The Fulton fender has a fender skirt while the Snowbear OEM one does not.
If you are looking to have this style of fender with a fender skirt, then you will need to make sure there is enough clearance inside the fender for the tire so that it does not rub the fender skirt. If your tires are more than 7 inches wide, the fender will not...
view full answer... - Trailer Fenders in Black For 145R12 Tires & Mounting Brackets
- For a single axle trailer fender in black that will work with 145R12 tires and wheels you need the Single Axle Trailer Fender # F008559.
You will also use the Mounting Brackets for Trailer Fender # CE26061G-2.
view full answer... - Plastic Fenders for a Spartan Boat Trailer
- This is a common issue with the old Spartan Trailers. Unfortunately we do not have any fenders with that kind of mounting style. The Fulton Single Axle Trailer Fenders # F008574-2 (for white) or the Fulton Single Axle Trailer Fenders # F008584-2 (for black) are three step style plastic fenders for 14" wheels. These along with any option that we would have, would likely require some fabrication.
I have added a diagram showing all of the dimensions of these fenders so you can see if they...
view full answer... - Will the Fulton Plastic Fender # F008573 Fit a 2000 Sea Ray 180 BR Trailer
- The replacement fenders we carry are built as universal items that you would fit to your trailer based on tire size. They are not listed as for specific trailer models, so you would have to measure to see if the fenders would fit your 2000 Sea Ray 180 BR Trailer. If you have existing fenders, you can measure them and find out if the Fulton Plastic Fender, part # F008573 would work. If the Fulton fender will fit, you can use the mounting brackets that were from the original fenders if they...
view full answer... - Will These Single-Axle Trailer Fender part # HP79VR Install on my 5x8 Barron Trailer
- Yes, these 16-Gauge Steel, Single-Axle Trailer Fender, part # HP79VR, should bolt up to your Barron 5x8 trailer after you drill a few holes it it. This fender is for wheels that are 13-14 inches like what is on your trailer.
The dimensions of this fender are 7-3/4 inches wide x 28 inches long x 10 inches tall. Compared to the measurements of your old fenders this should work very well for you. However, it looks like this fender will be 1/4 inch thinner in width, 4 inches longer in length....
view full answer... - Will the Fulton 30 Single Axle Trailer Fender with Top and Side Steps Replace a 39-1/2 Fender
- The Fulton Single Axle Trailer Fender with Top and Side Steps part # F008583 measures 40" from end to end. It is universal so it can be made compatible with pretty much any trailer. It is likely what you need but keep in mind you may need to adjust/modify the existing trailer fender mounting bracket. I am not aware of any trailer fenders that are exactly 39-1/2" long.
view full answer... - Steel Fender for 14 Inch Wheels for Boat Trailer
- For a steel fender that will work with 14 inch wheels I recommend the Single Axle Trailer Fender with Backing # HP79VR.
This fender measures 28" long x 7-3/4" wide x 10" tall and can be welded on or bolted on using Mounting Brackets for Trailer Fender # CE26098G-2.
The fender can also be painted to match the color of your boat trailer if you like. I have added a link to a video review for you as well of the Single Axle Trailer Fender # HP79VR.
view full answer... - What is Needed to Determine Correct Trailer Fender
- I'm not sure what you are referencing specifically by measuring the area around the trailer tire to get the correct fender size. To get the correct fender you simply need to know the size of your wheel, or you can measure your current fenders (if applicable). Wheels only have certain trailer tire sizes they fit, so knowing the wheel size will get you the correct fender size in terms of length and width.
For example, if you have 14 inch wheels you could use the CE Smith Single Axle Trailer...
view full answer... - What Fenders do You Recommend for My 16 Inch Wheels?
- For your ST235/80-16 tires like the Karrier Radial Tires # AM10248, I recommend the Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheels # HP46VR (for single axles) or the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 15" to 16" Wheels # HP64VR (for tandem axles). Both of these fenders are designed for 16 inch wheels. We do not carry single fenders that are less than 36 inches long or tandem-axle fenders that are less than 68 inches long that are confirmed...
view full answer... - Correct Backing Plate for Tandem Axle Teardrop Trailer Fenders - 14" to 15" Wheels
- The correct backing for the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers part # HP44VR is the Backing Plate for Tandem Axle Trailer Fender part # HP82FR. Please note, this will need to be tack welded to the backside of the fender.
view full answer... - Will The CE Smith Single Axle Trailer Fender Fit On a Tandem Axle Trailer?
- The CE Smith Single Axle Trailer Fenders # CE19504-2 were never intended to be mounted in this type of fashion, but it looks like it could be doable but will require modification.
I recommend considering install some Steel Tandem Fenders # HP44VR. While these are the fender size for a 14" wheel like the fenders you found you will want to measure your setup to ensure the fender will fit. Each fender is 65" long, 9" wide and 15" tall. We also have the Backing Plate # HP82FR
view full answer... - Recommended Trailer Fender for Karavan Trailer with Upgraded 12" Tires
- We have some excellent trailer fender options for your Karavan Trailer. In order to choose the correct one, simply note the style and fender material of your existing then you can choose the correct replacement from the list below. The Single Axle Trailer Fender part # F008559 for example is a plastic fender with top step that's black in color. It works with wheels up to 12". Please note, you may need to modify your existing brackets to make the new fender work.
view full answer... - How do CE Smith Fenders Mount as Replacements?
- The CE Smith Single Axle Trailer Fenders, # CE19502-2, are meant to be bolted on to your trailer's existing brackets. There are no stand-alone brackets which will work for fenders that have a side step and apply to 12 inch wheels, but you do have some options.
The Fulton Single Axle Trailer Fender, # F008549, has a top step and mounting slots which will allow you to use Mounting Brackets for Trailer Fender, # CE26061G-2 to install them.
view full answer...
Go To Results